Can work under +55℃ ambient

FANTASTIC T3 swimming pool heat pump combine T3 DC inverter compressor and T3 structure and T3 logic control technology, FANTASTIC T3 Inverter pool heat pump’s operating ambient temperature range: -15℃ ~ 55℃. Intelligent control and automatic load adjustment design ensure reliable operation under different climatic conditions,It is particularly suitable for the Middle East region.

3 ℃~12 ℃

FANTASTIC All In One Heat Pump Water Chiller can produce 3 ℃~12 ℃ cold water, easy to install and use, meeting customers' requirements for cold water

Wide Cooling Capacity Range

The cooling capacity of FANTASTIC air source heat pump water chiller is from 2.5kW to 225 kW or customized to be larger for you .Suitable for different size of project demands, no matter for household or commercial.

Lower operation cost than traditional heat pump

FANTASTICEVI Inverter Ultra High Temperature Heat Pump has precise energy stage settings ensures the working unit to achieve the desired energy saving efficient . Heat pump will change compressor using quantity as the real heat required by water inlet temperature .when need higher heating load , it will use full compressor quantity , when water temperature close to target set temperature , it need lower heating load,then will off some compressor and just use the compressor quantity as the real heat load.

FANTASTIC High Efficient plate Heat Exchanger

FANTASTIC 316S.S plate heat exchanger is with increased heat exchanger area to improve the heat transfer ability and evenly distribute over the surface of the copper, reducing water film, and improving efficiency.

Centralized Control

FANTSTIC HEAT PUMP WATER CHILLER can be control up to 16 units of swimming pool heat pump at the same time by one controller comes equipped with centralized control that makes temperature adjustment and failure r ew much easier and more practical. By incorporating the master-slave control into the design, the whole units can work together with higher efficiency without interfered by any failure of the slave unit during operation.

Smart Control by phone and Modbus

The intelligent controller with RS485 is adopted to realize the linkage control between the heat pump unit and the terminal application end. With the Cascade function, multiple heat pumps can be controlled at once for greater operating efficiency. The WIFI APP enables users to operate their units through a smart phone wherever and whenever they are.

Remote monitoring and remote control, remote maintenance，remote upgrade

FANTASTIC Inverter Heat Pump can be remotely controlled via mobile phone or Modbus. You can also remotely and in real time understand the current operation status of each machine you purchased via the Internet, whether it is normal, whether there are problems, and if there are any problems, remotely understand where they are. We can also help you modify parameters or programs to solve customer problems, so you don't have to make a long trip to the customer's place. Moreover, we can remotely upgrade the program of your heat pump at any time according to the actual situation to ensure that its functions become increasingly powerful

Smarter heat pump

1.The compressor of FANTASTIC HEAT PUMP WATER CHILLER is like a "speed-regulating motor",it can flexibly adjust its speed, running slowly when the heat demand is low and fast when the heat demand is high, without having to operate at full capacity all the time and consume a lot of electricity. 2. Slow rotation has a higher efficiency, with the heat supply precisely matching the demand. It consumes the least electricity and is more energy-efficient. It won't waste electricity on unnecessary work, and the output heat can also precisely match the needs of the home 3.The compressor does not need to be frequently turned on and off and can operate within the high-efficiency frequency range, making it more durable and having a longer lifespan. 4.Each compressor has an "optimal working zone", and each compressor also has its own "frequency range" with the highest efficiency (neither rotating too fast nor too slow). It can precisely stay in this "optimal zone" to work all the time, always maintaining an energy-saving and efficient state.

Smarter control

FANTASTIC HEAT PUMP WATER CHILLER will be equipped with AI setting control points based on the actual climate of your local area, guiding the comprehensive effect of the overall use of heat pump compressors, fans, etc., maximizing the efficiency at each outdoor temperature. When the unit is running, at a lower water temperature demand, the heat pump will not overheat. However, it continuously heats at a lower water temperature according to the required temperature, providing a stable room temperature. At the same time, as the outdoor temperature rises, the frequency of the compressor will be reduced, thereby improving efficiency. It intelligently ensures a stable room temperature and the actual comfort of users.

Smarter Defrosting

FANTASTIC HEAT PUMP WATER CHILLER uses high-performance adaptive intelligent defrosting technology, which can automatically adjust the operation of the heat pump according to the actual operating status, monitors the operating temperature and defrosting time through multiple sensors, and performs intelligent defrosting based on actual needs to prevent ineffective operation. It is more energy-efficient and effective than conventional defrosting reducing the effective defrosting time by 50% compared with traditional heat pumps.

Smarter Eco - mode

The ECO - mode is a mode designed for customers with the aim of combining comfort and energy conservation. It is tested and maded by our company in the laboratory based on the annual environmental temperature and humidity changes in different regions. Different fixed water temperatures are set under different environmental temperatures. Because in some warmer weather, the setting water temperature doesn't need to be too high. Setting it lower is not only comfortable but also energy-efficient. And when the ambient temperature drops, it will automatically set a higher and different water temperature to adapt to the changes. After entering this mode, the water temperature points are all intelligently set by us. Customers don't need to operate them themselves. This not only provides customers with a comfortable and energy-saving experience but also makes it convenient for them, reducing the trouble of frequently modifying the water temperature.

Lower operation cost than traditional heat pump

FANTASTIC HEAT PUMP WATER CHILLER has precise energy stage settings ensures the working unit to achieve the desired energy saving efficient . Heat pump will change compressor using quantity as the real heat required by water inlet temperature .when need higher heating load , it will use full compressor quantity , when water temperature close to target set temperature , it need lower heating load,then will off some compressor and just use the compressor quantity as the real heat load.

165V-270V/ 190V-390V, It's fine even when the power supply voltage fluctuates greatly

FANTASTIC HEAT PUMP WATER CHILLER's input voltage alows 165V-270V,DC unit output voltage allows 190V-390V,PFC maintains 360V.It's fine even when the power supply voltage fluctuates greatly.

Multiple protections

1. Anti-freezing protection Through various anti-freezing technologies such as water pump circulation, system circulation, and chassis heating, the temperature of the heat pump and pipelines is automatically monitored. When the ambient temperature drops to the anti-freezing temperature, the circulating water pump starts to operate. The heat pump and pipeline temperatures are automatically monitored to prevent system freezing.The chassis heating optimizes the drainage path of the evaporator, heats the chassis, and prevents frost formation at the bottom. 2. Anti-leakage refrigerant protection There is a dedicated refrigerant leakage detection sensor line. If a leakage occurs, the unit will shut down for protection. Only after ensuring the normal operation of the unit will the protection be activated. 3. High-pressure protection When the refrigerant system malfunctions and the compressor pressure is too high, a shutdown protection will be triggered to protect the compressor. Only after ensuring the normal operation of the unit will the protection be activated. 4. Water flow protection When the water system gets clogged or there is a problem with the installation, a water flow protection will be triggered to remind the user or engineer to check the waterway system. 5. Compressor overheat protection,and so on, more....

Easy to install

In addition, we also have the Hydraulic module. After customers purchase the heat pump, they don't need to install various cumbersome installation valves, water pumps, expansion tanks, three-way valves, etc. We will install all of them for you in the Hydraulic module. You just need to connect the water pipes and it can be used

Your Best Choice for different projects

Outstanding performance under all conditions, FANTASTIC Heat Pump WATER CHILLER has always been selling well all over the world. We can customize the products that customers want for different projects. It can be from 2.5kW to 225 kW or customized to be larger for you, allow for fluctuations in various voltages, AI control for excellent defrosting, and various energy-saving and high-performance modes and protection mode. It’s your best choice.