Wholesale Supplier Heat Pump, Heat Pump Wholeseller Factory
Air to Water All in One Heat pump
Air to Water All in One Heat pump

Air to Water All in One Heat pump

  • Main Features:
    • R32 or R410a
    • Heating Capacity: 3.5kw, 4.6kw
    • Tank: 150L, 200L
    • Inner Cylinder Tank: Enamel
    • Ambient Temperature: -10~45℃
    • Hot Water Outlet: 25~60℃
    • Heat Exchanger: 316#stainless steel coil
    • Centrifugal fan, low noise
    • High COP: 3.8
    • Certified CE, ROHS, SAA

Core Feature

18 years experience - FANTASTIC company has manufactured over 44,000 Air to water all in one heat pumps worldwide.

Affordability - Save energy & high performance  - As the high COP of FANTASTIC air source heat pump water heater, it can heat the water for about 30% of the cost of heating with gas and  75% of electric water heater, High COP means more energy saving.
Ex. $1 input - $ 4.1 of energy output at COP of 4.1

Long life -high-quality components FANTASTIC air source heat pump all in one type equipped with 2205 stainless steel or enamel inner tank, Copland or Panasonic compressor, 304 axial or centrifugal fan motor and fan blade, and so on. 

Certificate - FANTASTIC heat water heater certified with CE, ROHS for Europe and SAA, C-tick, standard market, water market for the Australian market.

 

 

If you are looking for a China heat pump manufacturer, you have more than likely come across the phrase "Chinese-Made Products" on the Internet. This is not a misnomer. It is more accurate to say that a particular product is made in China, and that it was assembled by machines (or Chinese workers) using the same blueprints as those produced in Japan or Italy. But is this always the case?

 

There have been cases in the past where a heat pump manufacturer has attempted to pass off some of their products as being made in China when in all reality they were assembled in the West. Such attempts were caught on tape and resulted in huge fines being levied against the company involved. So how can you tell if a China heat pump manufacturer is telling the truth? Here are a few clues to look out for.

 

Does the company offer receipts for the products they sell? If so, and the machine was bought in the name of someone else (as is sometimes required), then the sale was fraudulent. If the equipment was bought in the name of a person who lives in China, and it was shipped to them without their knowledge, then that is also fraudulent. Look at the invoice. Are there any red flags there that would indicate that this was a mistake or error?

 

Has the customer service been less than adequate? There are two reasons why a heat pump may get faulty. Either the customer does not install the system properly, or the user did not understand what they were doing when they attempted to make the purchase. It is easy to make the assumption that a large number of heat pump manufacturers are not trained in the installation, or that those who are not experienced in the field do not really care. Both of these assumptions could be true.

 

Has the company simply gotten more efficient over the years? The number of patents granted by the Chinese government has increased dramatically over the last decade. Some Chinese heat pump manufacturers have gone out of business due to the fact that they did not keep up with the competition. A lot of times patent applications are issued to companies that have not improved much in the last few years. While efficiency should be a consideration in choosing a manufacturer, experience in manufacturing should be a major consideration.

 

These are all important things to consider when looking at a China heat pump manufacturer. Do not be fooled by the number of patents the company has received. Focus instead on how long the company has been around, how many customers they have served, and how satisfied their customers are. This will allow you to make an informed decision about the best China heat pump manufacturer.

 

 

 

 

 

 

 

 

 

 

 

 

Core Feature

 

Product Detail

  • High COP, Energy-saving, Save Your Money

  • Gas Coil Wrap the Inner Tank

  • Meet Australian & European Certification Standard

  • Panasonic or Mitsubishi Compressor

  • LCD/LED Controller for Option

  • 2205S.S. or Enamel Inner

High COP, Energy-saving, Save Your Money

FANTASTIC all in one heat pump with Good COP, and could save up 75% electricity cost than normal electric water heat pump, energy-saving, save your money.

High COP, Energy-saving, Save Your Money

Gas Coil Wrap the Inner Tank

Gas Coil wrap the inner tank, so the heating coil will not be rust forever, and coil is flat coil to contact the tank bigger, enhance the heat exchange ability.

Gas Coil Wrap the Inner Tank

Meet Australian & European Certification Standard

FANTASTIC all in one heat pump meet the Australian and European certificate standard of SAA, C-TICK, WATER MARK, CE, RoHs and so on.

Meet Australian & European Certification Standard

Panasonic or Mitsubishi Compressor

FANTASTIC all in one heat pump using famous Japanese brand compressor, good quality and long life.

Panasonic or Mitsubishi Compressor

LCD/LED Controller for Option

FANTASTIC all in one heat pump could choose LCD or LED controller for option for customer choose.

LCD/LED Controller for Option

2205S.S. or Enamel Inner

FANTASTIC all in one heat pump with tank 2205S.S. or Enamel Inner which is high anti-corrosion and good pressure bearing .Working life is much longer than other stainless steel.

2205S.S. or Enamel Inner
 Model   FD010T–150 FD010T–200 FD010T–250  FD010T–300 FD015T–200 FD015T–250 FD015T–300
 Application Number   2–4 2–6 2–7 2–8 2–6 2–7 2–8
 Water Volume L 150 200 250 300 200 250 300
 Rated Output Water L/h 75 75 75 75 100 100 100
 Rated Heating Capacity kW 3.5 3.5 3.5 3.5 4.5 4.5 4.5
BTU/h 11900 11900 11900 11900 15400 15400 15400
 Rated Input Power kW 0.95 0.95 0.95 0.95 1.25 1.25 1.25
 Rated Input Current  A 4.3 4.3 4.3 4.3 5.7 5.7 5.7
 Auxiliary Electric Heater kW 1.5 1.5 1.5 1.5 1.5 1.5 1.5
 Rated Temp.Of Water Output 55 55 55 55 55 55 55
 Max.Temp.Of Water Output 60 60 60 60 60 60 60
 Power Supply V/PH/Hz 220/1/50
 Compressor   Rotary
 Compressor Qty   1 1 1 1 1 1 1
 Fan Qty    1 1 1 1 1 1 1
 Noise  dB(A) 48 48 48 48 50 50 50
 PTR valve inch 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2"
 Hot Water Outlet inch 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4"
 Water Inlet inch 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4"
 Working Temp.Range –7 ~ 43
 Fan Direction   vertical vertical vertical vertical vertical vertical vertical
 Refrigerant Type   R134a
 Max.Working Pressure Tank MPa 0.7 0.7 0.7 0.7 0.7 0.7 0.7
 Unit Net Dimension( Φ×H ) mm Φ560×1700 Φ560×1910 Φ560×2120 φ640×1920 Φ560×1910 Φ560×2120 φ640×1920
 Unit Shipping Dimensions( L/M/H ) mm 650×650×1840 650×650×2050 650×650×2260 730×730×2070 650×650×2050 650×650×2260 730×730×2070
 Net Weight kg 55 65 80 95 68 83 98
 Shipping Weight kg 65 75 90 105 78 93 108
看不清,请点击我!

contact us

contact-email
contact-logo

FANTASTIC ENERGY-SAVING EQUIPMENT CO., LTD.

We provide customers with quality products and services.

看不清,请点击我!

If you would like to leave us a comment please go to contact us

top