Suggestions for Pool Heat Pump Installation and Maintenance

With the improvement of national fitness awareness, electric pool heat pump becomes popular gradually, many consumers only know the energy saving and environmental friendly characteristic of electric pool heat pump, but know little about how to install and about maintenance. Today FANTASTIC engineers will explain in details about installation and maintenance for electric pool heat pump.

The installation of electric heat pump for pool mainly includes two parts: the installation of electric heat pump pool heaters and the installation of the pool water system.

Four Precautions for Installation of Electric Heat Pump Pool Heaters

1. For electric pool heat pump with side air outlet, the distance between air inlet surface and the wall should be larger than 1 meter. If two units are in opposite to each other, the distance between should be larger than 1.5 meters.

2. Measures should be taken to ensure large volume of condensate water can be drained smoothly around the electric pool heat pump.

3. Only one partition wall around is allowed to be higher than the electric pool heat pump.

4. The basic height of the electric pool heat pump should be larger than 300mm and greater than the local snow thickness.

Four Suggestions for Installation of Pool Water System

1. The electric heat pump for pool should be installed in the downstream of all filtration devices and pool water pump, and in the upstream of all chlorine generators, ozone generators and chemical disinfection devices.

2. Under normal circumstances, the electric heat pump for pool should be installed within 7.5 meters from the pool, and if the pool water pipe is too long, 10mm thick insulation are suggested for the pool water pipe, so as to avoid the heat loss that result in insufficient heat.

3. Shorten the waterway pipeline as much as possible, avoid or reduce unnecessary pipeline change, in order to reduce resistance loss; install exhaust pipe in the highest position of the water main pipeline for convenient air exhaust in the water system; install water discharge valve in the lowest position of the system for easy water discharge when the system needs to be cleaned.

4. The water system must be installed with water pump with appropriate flow and head of delivery, to ensure the water flow meets the requirements of the electric heat pump for pool.

After the installation of electric heat pump pool heaters, users’ regular maintenance can contribute to make the electric heat pump pool heaters more durable. Then how to do a good job for regular maintenance on electric heat pumppool heaters?

1. All the safety protection devices in the electric heat pump pool heaters are set before package, do not adjust on your own.

2. Often check the working conditions of the various parts of the electric heat pump pool heaters, check whether there is oil on the pipeline joint and inflation valve to ensure there is no refrigerant leakage.

3. Often check the circulation water pump and waterway valves to ensure they are working properly and there is no water leakage.

4. If need to shut down the electric heat pump pool heaters for a long time, the water in the pipeline should be discharged and power supply should be cut off. Do a comprehensive check before starting the system again.

5. Often check whether the wiring of the electric heat pump pool heaters power supply and electrical system are firm, whether the electrical components are normal. If not, it should be repaired and replaced in time.

As a professional manufacturer of heat pump, FANTASTIC not only do research and development and production on electric heat pump for pool, but also a variety of heat pumps including dehumidifier and household and commercial heat pump and so on. Looking for more information about different kinds of heat pump? Contact us at anytime. Fantastic®, a professional heat pump manufacturer always here to provide you reliable, professional, different, fantastic service.