Heat Pump System Factory, Heat Pump System Manufacturer

Multi-functional Pool Heat Pump System

Main Features:
• R32 or R410a
• Function: One unit can make
a. Pool heating/cooling
b. Dehumidification
c. Room heating/cooling
d. Fresh air
e. Heat recovery, energy recovery
• Super energy-saving and Eco-friendly
• Fully automatic-SNT touch panel controller
• ERV core-reduce outdoor air load up to 80%
• Multiple protection, safe and reliable

Core Advantage

Product Detail

Multi-function
100% Heat Recovery in Mode of Room Cooling + Pool Heating
COP up to 10.0 in Pool Heating + Dehumidifying Mode
Titanium Heat Exchanger
Ventilation Mode (Fresh air)

Multi-function

Swimming pool multi-function pool heat pump combines pool water heating/ cooling, indoor pool room cooling and heating, dehumidification, intelligent ventilation in one unit by precise integration control.

100% Heat Recovery in Mode of Room Cooling + Pool Heating

With the patented heat recovery design of 2 different heat exchangers and unique heat recovery control, during indoor room cooling operation, it can be heat-recovered to pool heating, which means pool heating is free of energy consumption.

COP up to 10.0 in Pool Heating + Dehumidifying Mode

Unit applies triple generation technology which makes very prominent effect on energy-saving, with comprehensive COP up to 10 under pool water heating + dehumidifying mode.

Titanium Heat Exchanger

For pool heating part, unit uses high efficient heat exchanger with internal coils made of titanium metal with strong corrosion resistance to ensure long service life of the unit. Pool water loop and refrigerant loop are designed to be counter-flow layout inside the heat exchanger to ensure refrigerant outlet sub-cooling degree and thus improve the system efficiency.

Ventilation Mode (Fresh Air)

When outdoor ambient temperature and humidity approaches the designed requirements, ventilation mode will be started to realize comfortable effect indoor and save significant operating cost.

Multi-function Pool heat pump (pool heating, room heating/cooling, dehumidification, fresh air)
Model	Indoor Unit		FPDHCD060S3(I)	FPDHCD120S3(I)	FPDHCD200S3(I)
Model	Outdoor Unit		FPDHCD060S3(O)	FPDHCD120S3(O)	*FPDHCD100S3(I)2**
Air Flow Volume	m³/h		4000-4500	7000	10000-11000
Static Pressure	Pa		250-300	400-450	600-800
Exhaust Air Flow Volume	m³/h		1000	2000	3300
Dehumidification	kg/h		15	30	50
Air Cooling Capacity	kW		17	33	51
Air Heating Capacity	kW		19	36	60
Pool Heating Capacity	kW		30	55	90
Surface Air Cooler Cooling Capacity	kW		32	53	91
Surface Air Cooler Heating Capacity	kW		40	62	102
Water Flow Volume	m3/h		6	8	14
Pool Water Pipe Dimension			1.5" Female	2" Female	2.5" Female
Condensate Drainage Pipe Dimension			1" Male	1" Male	1" Male
Refrigerant			R410A	R410A	R410A
Throttle Control			Electronic Expansion Valve
Compressor Quantity			1	1	2
Compressor Power Input	kW		5.6	10.6	8.6*2
Power Supply			380V/3PH/50Hz
Unit Power Input	kW		7.1	12.8	24
Dehumidifying Heat Exchanger Type				Internal Threaded Pipe + Hydrophilic Aluminium Foil
Heating Heat Exchanger Type				Internal Threaded Pipe + Hydrophilic Aluminium Foil
Re-heat Surface Air Cooler			Flat Pipe + Hydrophilic Aluminium Foil
Water Side Heat Exchanger Type			Titanium Heat Exchanger
Fan System
Outdoor Unit	Fan Quantity		1	2	4
	Power Supply		220V/1PH/50HZ	220V/1PH/50HZ	220V/1PH/50HZ
	Power Supply Access		Indoor Unit Output Terminal
	Fan Motor Power Input	kW	0.5	0.5*2	0.5*4
	Coinnecting Pipe	mm	φ19 φ12.7	φ22 φ16	2φ22 2φ16
Indoor Unit	Fan Quantity		2	2	3
	Fan Motor Type			Low Noise Front Bending Double Air Inlet Centrifugal Fan
	Air Supply Fan Motor	kW	0.8	2.2	1.5*2
	Air Exhaust Fan Motor	kW	0.18	0.32	0.55
	Air Valve Quantity		3	3	3
	Air Duct Filter Quantity		2	2	2
Dimensions & Weight
Outdoor Unit	L/W/H	mm	810780830	1450780910	1450780910
Outdoor Unit	Weight	kg	70	100	100*2
Indoor Unit	L/W/H	mm	190010001680	200012001980	250016002280
Indoor Unit	Weight	kg	400	650	1000
Remarks: 1. Dehumidifying capacity testing condition: Indoor DB 27℃, WB 21.2℃, unit operated for 1hr. 2. Air cooling capacity testing condition: outdoor air return temp. 35℃, indoor air return temp. 27℃. 3. Air heating capacity testing condition: outdoor air return temp. 7℃, indoor air return temp. 21℃. 4. Pool heating capacity testing condition: outdoor air return temp. 24℃, unit water inlet 25℃, water outlet 28℃. 5. Dimensions after adding air vent: 2075/1200/2155. 6. Working ambient temperature range: 0℃~43℃.